PDA

View Full Version : Free LP Kit Hardware



FrankenWashie
10-01-2017, 04:04 PM
Hi guys, does anyone want a set of Chrome pickups, pots, electric bits, kit wire, knobs, strap buttons, Chrome tuners and Chrome TOM bridge and Tailstop?

I have all of the bits left over from the Cliche Black LP kit that won't get used by me, will they be any use to anyone else?

Free to a good home, Happy to post off on snail mail within Aussie.

ILRGuitars
16-02-2017, 11:28 AM
G'day Frankie. I'd love it mate.

FrankenWashie
16-02-2017, 12:17 PM
I'll take some snaps of what i have and you can take your pick ILR.

ILRGuitars
16-02-2017, 03:42 PM
Just send it all mate. Much appreciated. My address is [hidden by mods]. [ed Brendan here - hidden the address for safety - best bet is to send an internal mail (see Notifications in the top bar near Welcome, ... etc).

wokkaboy
16-02-2017, 03:55 PM
ILR I would be sending Frankie a PM your address if you want your home address left private !

FrankenWashie
19-02-2017, 11:42 AM
As promised a photo of the pick-ups i have sitting spare:
17387

theres 2 sets of Gold LP pups, 2 sets of chrome LP PUPS and a Black set of HB's.

Im going to hold on to the white HB set, as I've an idea in mind for them, but the pup rings can go because i won't need them.

If anyone is interested just PM me.

hazer
27-06-2017, 11:57 AM
Hey Frankie - would love some pickups if you still have some. Do you have any idea what specs they are? :)

I'll send you a PM.

Thanks in advance.

wokkaboy
27-06-2017, 12:07 PM
Hey Hazer wait for Frankie to get back to you but the photo they all look like chinese pups so the resistance will be probably below 10 ohms. Saying that I tested some PBG LP humbuckers Saturday and the neck was about 9.3 ohms and the bridge about 10.5 ohms. Think they vary a little.

FrankenWashie
27-06-2017, 12:22 PM
I should probably belatedly state that these are all gone or attached to projects. Sorry about that folks.

wokkaboy
27-06-2017, 12:43 PM
all good Frankie that photo was posted in February so I would expect them to be assigned to new projects since then !

Simon Barden
04-07-2017, 05:26 PM
Hey Hazer wait for Frankie to get back to you but the photo they all look like chinese pups so the resistance will be probably below 10 ohms. Saying that I tested some PBG LP humbuckers Saturday and the neck was about 9.3 ohms and the bridge about 10.5 ohms. Think they vary a little.


I think you mean k ohms. 10 ohms would have an output a little on the low side. :)