PDA

View Full Version : Pickup upgrade for The Count



dave.king1
05-12-2016, 08:29 AM
Quite a few years ago a mate gave me a set of Seymour Duncan 1970s Hot Stack Strat pickup and they had gone missing but yesterday they were found in a box containing old model aero engines from my callow youth.

Sadly they are the wrong colour and I've not been able to find black replacement covers of the correct depth so it will be what it will be

15522

Going into The Count my STA-1
15523

I have done some recording with the current kit pups which sound most acceptable so it will be interesting to see if the swap is worth the effort, I'll do an AB of the sound file and post it once done

gavinturner
05-12-2016, 09:03 AM
Nice! No doubt it will be worth the trouble. Looking forward to hearing the side-by-side comparison.

cheers,
Gav.

WeirdBits
05-12-2016, 09:11 AM
You could always get two sets of black covers and do a cut and shut to get the depth you need. Or, make friends with someone who can 3D print a set for you.

dave.king1
05-12-2016, 09:21 AM
Good thought weirdy.

The SDs are about 5mm taller than standard Strat pups, 16.5mm top to bottom.

SD do black covers for Hot Rails but are slotted for the raised rail which in mine is flush