PDA

View Full Version : Incorrect FV-1G Wiring



ZacMetal99
10-01-2016, 03:18 AM
I couldn't help but notice that there is no wiring diagram for the FV-1G (Gibson style Flying V) as it is placed in the same diagram as the "2 Humbucker 2 Pots One Toggle" though it has three pots. As I've said before, I've had my eye on one of these kits for a while, and if it's not too much an ask, would like to know what I would expect to deal with. Thanks :) /,,/

vh2580
10-01-2016, 05:28 AM
Hi Zac
If i cant find a diagram to suit or want to look at other configurations I usually jump on this site which has heaps of wiring configs.
http://www.guitarelectronics.com/category/wiring_resources_guitar_wiring_diagrams/

For FV-1G I used this one.
http://www.guitarelectronics.com/product/WD2HH3T21_00/Guitar-Wiring-Diagam-2-Humbuckers3-Way-Toggle-Switch2-Volumes1-Tone.html

wokkaboy
10-01-2016, 09:32 AM
Hi Zac, I used this diagram attached.
Depends if you want a master volume and 2 tones (this one) or you could have a volume for neck and bridge pup and master tone

ZacMetal99
11-01-2016, 01:43 PM
Cheers guys :)

wokkaboy
11-01-2016, 01:48 PM
Hi Zac, I find the Seymour Duncan diagrams clear to work with. Have a think about volume for neck and bridge pups and master tone, as 2 tones is bit of a waste IMHO. Or you could use the 3rd hole as a kill switch