PDA

View Full Version : Painting advice please.



Crusader
20-10-2015, 03:54 PM
Hi people,
So the ST-1 kit turned up today ( oh-yeah ) and the daughter says yes I want it that colour but with black crosses on it. Is it difficult to paint a pattern on top of a solid colour, and should I then put a clear coat on top?

Thanks in advance..
Neil

wokkaboy
20-10-2015, 03:59 PM
Hi Neil,
can you please post a rough sketch of the layout your daughter wants ? If the crosses will be large then you should be able to tape it off and paint the crosses or get a stencil made up in vinyl could be an option.
If the crosses will be small then I think a template/stencil would be the only option

Crusader
20-10-2015, 04:03 PM
Hi, sure. What I'll do is get her to do it. Once done I'll post it up.

Thanks
Neil

Crusader
21-10-2015, 07:14 AM
She would like me to do something like this...

6027

dingobass
21-10-2015, 07:23 AM
Cut out stencils would be the easiest way

stan
21-10-2015, 07:36 AM
and yes to a clear over the top

Crusader
21-10-2015, 07:50 AM
ok, thanks guys..

wokkaboy
21-10-2015, 08:39 AM
Hi Neil if you know a signwriter best get them to cut the crosses out of some vinyl or clear contact. Put down your base colour, then put the vinyl over with the crosses cut out. I used this method to get the stars on the Australian flag.
Otherwise get some contact or adhesive vinyl and a sharp blade and cut the crosses out.
Good luck let us know how you go !

Crusader
21-10-2015, 04:11 PM
Thanks for the advice, I'll show how I get on..