Loose Neck Cavity

[Devon]

Hi All,
Would anyone be able to advise on a good way to deal with a loose neck cavity? Just over a millimetre gap.

I can comfortably slot one card in without a problem and second one with little resistance.

The heel? or end of the neck measures at 54.9 mm
3908

and the cavity measures 56.07
3909

Thank you.

[Nickosaurus]

Check out Pab's EX build diary. He glues veneers in the joint to create more tension.

[wokkaboy]

Devon if you can find some 0.6mm thick veneer glue to each side of the pocket sides and sand back a bit if required

[Devon]

Veneers eh. Ok sounds like a plan.

Thanks Nick.
Thanks Woks.