View Full Version : Serial Numbers
keloooe
29-05-2015, 07:01 AM
Hey guys,
Just to add some final touches to my builds I hope to either stamp or press a serial number to my builds and get that final, professional looking touch to the rear of the headstock. Any ideas on what to do?
pablopepper
29-05-2015, 07:16 AM
These are what you need. http://www.ebay.com.au/itm/LETTER-and-NUMBER-PUNCH-STAMP-SET-3mm-4mm-5mm-6mm-8mm-New-/181455919559?pt=LH_DefaultDomain_15&var=&hash=item2a3f9d99c7
Number punches.
keloooe
29-05-2015, 07:49 AM
Ah, yes. Cheers Pabs! Hey Pabs, only 399 posts to go till you hit Overlord!
pablopepper
29-05-2015, 07:50 AM
Well would you look at that. 398. ;)
keloooe
29-05-2015, 07:59 AM
Let me guess, soon it will be 397?
pablopepper
29-05-2015, 08:09 AM
Soon, bud.
andrewdosborne
29-05-2015, 08:11 AM
Dare I mention the Green Shed of Doom...
http://www.bunnings.com.au/supatool-36-piece-letter-and-number-punch-set_p5810181
keloooe
29-05-2015, 08:12 AM
I'm just a "casual" 2,827 posts from GAStronomist...
dingobass
29-05-2015, 09:02 AM
If you go for the letter punch idea (which is a good one) make sure you can get a punch holder as these beasties are notoriously difficult to keep nicely lined up when used individually.
wokkaboy
29-05-2015, 09:28 AM
great idea DB, where can you get the punch holder from ? I've had a crack at single punches and it is hard to line up and get equal spacings.
@ Andrew thats a gutsy move posting big green shed links ! hahah
keloooe
29-05-2015, 09:31 AM
Yes DB I am also interested as to where you can get one of these holders... ;)
dingobass
29-05-2015, 10:29 AM
Should be able to get the holder from a QUALITY tool shop, not the big green shed full of sh#t....
Fretworn
29-05-2015, 11:19 AM
I've just been printing serial number decals that I put on the back of the headstock.
keloooe
29-05-2015, 11:40 AM
Yeah Fretty but my numbering system is based off Gibson's system which has the Julian Date, and of course I never hit any dates I plan :D
andrewdosborne
29-05-2015, 12:52 PM
great idea DB, where can you get the punch holder from ? I've had a crack at single punches and it is hard to line up and get equal spacings.
@ Andrew thats a gutsy move posting big green shed links ! hahah
Haha yes I'm trying to get a permanent membership to the NW!
keloooe
29-05-2015, 01:54 PM
Well Andrew it's working well!
I'm in the naughty room then, I have that very set from that very place... no holder though. The quality actually seems quite good
Brendan
30-05-2015, 10:24 AM
I took Andrew's advice as a suggestion that this is something like you could be looking for at a store other than the green barn...
Brendan
30-05-2015, 10:25 AM
Oh and look - only one post from - "Moderator" :(.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.