PDA

View Full Version : PBG strat neck specs



pablopepper
29-07-2014, 01:06 AM
Hi guys, I'm putting together some templates and the artwork i've got is slightly borked. As a result, I need two measurements to make sure everything is to scale. On a PBG strat neck I need the width at the nut and at the widest part of the heel. If anyone has one about, I would greatly appreciate it if you could measure these for me. Cheers :D

wokkaboy
29-07-2014, 01:23 AM
Hey Pablo,
I'll try and remember to do this tonight and post it on this thread. From memory the nut is around 42mm wide but I'll confirm

pablopepper
29-07-2014, 02:17 AM
Thanks Wokka.

wokkaboy
29-07-2014, 09:15 AM
Hey Pablo,
the nut is 42mm wide and the neck heel is 54mm at the nut end and 56mm at the widest point (the bottom edge)

pablopepper
29-07-2014, 08:58 PM
Wokka = legend.