View Full Version : STA-1 Ash Body Strat - Neck Pocket Dimension
hidden_dog
10-04-2014, 10:25 PM
Hi,
Does anyone know the neck pocket dimension for the STA-1 Ash strat?
I was thinking of getting just the kit minus hardware so I can use it as a substitute body for my standard strat.
Thanks.
wokkaboy
11-04-2014, 12:00 AM
Hi Hidden Dog,
what dimension are you after, the longest length (to centre of pocket) and the width ?
I've got 3 of these kits built but I'd have to remove the neck to get the length measurement.
Dimensions should be the same as a standard ST-1 kit, I have one of them half built, I can post the dimensions tonight if you like ?
hidden_dog
11-04-2014, 11:38 AM
Hi Wokkaboy,
Thanks I'm after the width length and depth of the neck pocket cavity as I was thinking of refitting my standard fender neck to the ash body and have it painted as a tobacco burst.
hidden_dog
11-04-2014, 11:39 AM
I'll compare the dimension you have with my fender neck to see if it fits and if I should get the kit.
wokkaboy
13-04-2014, 04:07 AM
Hi Hidden Dog,
sorry it took a while, the pocket of the ST-1 is 73mm long to centre of pocket and 56mm wide, should be the same as the ash model
Hope your neck fits !
hidden_dog
14-04-2014, 03:20 AM
Thanks Wokkaboy, I'll check
Brendan
14-04-2014, 11:31 AM
Flick an email to Dingobass@pitbullguitars.com - he's working on a STA-1 at the moment (http://www.pitbullguitars.com/community/?mingleforumaction=viewtopic&t=1127.3#postid-20619).
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.