View Full Version : TL-1TB
pedro
05-04-2014, 05:48 AM
Hi Guys I have now got to the stage of fitting the trem arm, are there any instructions or templates as to the distance for the arm to be set away from the bridge or do I gauge the distance from the tone control?
Cheers,
Peter
Hey Pedro, I see you found your way to the right thread. I assume you're asking about the stoptail/trem arm unit supplied with that kit and what distance it should be behind the bridge/saddles.
I think the answer is that it's not important, you should go with a distance that looks good and doesn't put too much angle on the strings. Check out Dingobass's TL-1TB build as a good example.
http://www.pitbullguitars.com/wp-content/uploads/2013/01/TL-1TB-Demo-1-653x450.jpg
pedro
05-04-2014, 11:56 PM
Great thanks Adam....haha yes I discovered my error when I checked in on the home page.....very nice guitar Dingobass.!!
pedro
08-04-2014, 03:54 AM
Hey Adam, do you have the order that the trem arm metal and fabric washers sit on the arm, as mine have separated from the nut.
Cheers,
Peer
I don't Pedro, but I'm sure Dingobass posted a photo of the order somewhere... didn;t he email it to you?
If you wan5 to take a photo of the parts I'm sure the members can walk you through it.
dingobass
08-04-2014, 09:13 AM
The pic is posted under Locating Bigsby Trem
pedro
11-04-2014, 12:19 AM
Thanks Adam/Dingobass, apologies for being a pest...but I want to get it right.
Cheers
PS didn't get an email.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.