PDA

View Full Version : JR-1DC



Andyport
28-12-2013, 08:55 AM
JR-1DC in Tobacco Burst.

Grain filled using Timbermate Teak.
Sunburst stain was hand rubbed on.
Sprayed clear lacquer coats, then cut and polished to high gloss finish.

Standard kit other than truss rod cover and orange drop capacitors.

http://www.pitbullguitars.com/wp-content/uploads/2013/12/6x44b-Body-Full.jpg
http://www.pitbullguitars.com/wp-content/uploads/2013/12/551ri-Body-Close.jpg
http://www.pitbullguitars.com/wp-content/uploads/2013/12/bmf1q-Headstock.jpg

gavinturner
11-01-2014, 05:14 AM
JR-1DC in Butterscotch Wudtone.

Neck Finish: Vintage Amber Wudtone.
Custom Scratchplate and truss-rod cover.
Added bone nut, speed knobs, Orange-drop cap, push-pull tone pot, switchcraft jack and oval plate

http://www.pitbullguitars.com/wp-content/uploads/2014/01/9sxum-black_body.jpg

http://www.pitbullguitars.com/wp-content/uploads/2014/01/bubb5-black_back.jpg

http://www.pitbullguitars.com/wp-content/uploads/2014/01/m37il-outside_wide.jpg

cheers,
Gav.

robin
02-05-2014, 08:42 PM
Here's my Junior.

Golden Teak stain and finished in Tru-Oil
Several body mods/cuts
Lollar P90
Individual saddle bridge
CTS Pots
Orange Drop Caps

cheers
rob
http://www.pitbullguitars.com/wp-content/uploads/2014/05/u8y8l-001-10.JPG
http://www.pitbullguitars.com/wp-content/uploads/2014/05/nb88c-007-4.JPG
http://www.pitbullguitars.com/wp-content/uploads/2014/05/b66zt-014-2.JPG