PRS 1TS

[sgjames21]

Natural colours with cream pickup mounts and gibson standard les paul nobs
http://www.pitbullguitars.com/wp-content/uploads/2013/12/5510s-021.JPG
http://www.pitbullguitars.com/wp-content/uploads/2013/12/8ayi0-022.JPG
http://www.pitbullguitars.com/wp-content/uploads/2013/12/1f5uc-018.JPG

[McCreed]

I finished this PRS-1TS kit back in 2018, but I reference it often in others' threads (usually in relation to finishing). So rather than posting the same pics in multiple threads, I'll just link to this post. This was done with Angelus Leather Dyes (alcohol based) and Tru Oil (±28 coats).

42116 42117

42118 42119

[fender3x]

I finished this PRS-1TS kit back in 2018, but I reference it often in others' threads (usually in relation to finishing). So rather than posting the same pics in multiple threads, I'll just link to this post. This was done with Angelus Leather Dyes (alcohol based) and Tru Oil (±28 coats).

42116 42117

42118 42119This is a beauty, all the more so for being a one-off. I liked what you did on the cut away on the lower bout. But this pic gave me a little better look at it. I'm wondering if something similar could be done on one of my ES basses. I don't need the upper fret access, but I have been thinking about trying to figure out a way to round over the top edge, sort of like the front arm round over on a strat or p-bass. I am refinishing in a solid color anyway...

Sent from my LE2125 using Tapatalk