PDA

View Full Version : Wire Diagram



Nick Savanah
28-08-2013, 12:12 PM
Hi every one I am Nick,

I am doing a ST-1 and need a wire diagram, I am looking for a wire diagram for a humbucker in the bridge position and two single coil middle and neck for a ST-1, I would like to use a coil split with a push pull pot to make the humbucker single coil or as usual twin coil, can you please give me some options.



Mant thanks

Nick.

Brendan
28-08-2013, 12:39 PM
Try this one:
http://deaf-eddie.net/tdpri-drawings/hss-cs-series.jpg
Alternatively do a search for HSS wiring diagrams and look for the bits and pieces you are looking for - there's heaps out there :).

Brendan
28-08-2013, 12:42 PM
'Nuther one:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_pp


PS - welcome along Nick... Hope the ST-1's great for you..

WeirdBits
28-08-2013, 12:49 PM
Hi Nick, welcome to the forum.

There are a few options available, depending on which pickups and pots you are using. Here's three variations:
Seymour Duncan HSS, 1 Vol, 2 Tone, 5 way, Push Pull (http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_pp)
Guitar Electronics.com HSS with auto coil split (http://www.guitarelectronics.com/product/WDUHSS5L1101/WDU-HSS5L11-01.html)
DiMarzio HSS, push pull split bridge (http://www.dimarzio.com/sites/default/files/diagrams/1h2s1ppsplitv2t_alternate.pdf)

Hope that helps.

(Ah Brendan, you type too fast)

stan
29-08-2013, 07:03 AM
Welcome Nick, can recommend the seymour duncan site

Tim
29-08-2013, 11:03 PM
Welcome to the PBG clan Nick

gavinturner
31-08-2013, 11:12 PM
Welcome Nick! Sounds like a sweet project. Keep us up to date with your progress!

Cheers,
Gavin.