View Full Version : TL-1
TL-1 finished in Wudtone Butterscotch. Built by Dingobass.
http://pitbullguitars.com/wp-content/uploads/2013/08/jbfcx-TL-1-demo-1.jpg
http://pitbullguitars.com/wp-content/uploads/2013/08/218t1-TL-1-demo-2.jpg
http://pitbullguitars.com/wp-content/uploads/2013/08/aq4sa-TL-1-demo-3.jpg
Bass Guy
26-08-2013, 10:15 PM
Finished in Dark Amber. All stock.
http://pitbullguitars.com/wp-content/uploads/2013/08/5el8e-image.jpg
pablopepper
27-08-2013, 11:17 PM
TL-1 finished in Empress Black.
Extras:
-Red tortoiseshell pickguard
-Wilkinson PAF pickups
-Chrome pickup surrounds
-Wilkinson bridge
-Wilkinson tuners
-Sprague orange drop tone cap
-Gotoh string retainer
-Schaller strap locks
http://pitbullguitars.com/wp-content/uploads/2013/08/5n2cn-20130826_165023.jpg
http://pitbullguitars.com/wp-content/uploads/2013/08/ca3xn-PicsArt_1377517470147.jpg
GlennGP
05-10-2013, 09:12 PM
The Yellow Peril
Body finished in Wudtone Goldenrod on the body, extra gloss top coat.
Neck has a light coat of Goldenrod, then extra gloss.
After-market white pearloid 3-ply pick-guard.
Tone-preserving circuit and Orange Drop cap added to circuitry, otherwise stock.
http://pitbullguitars.com/wp-content/uploads/2013/10/3nuu2-GOTM2.jpg
http://pitbullguitars.com/wp-content/uploads/2013/10/07ta4-GOTM3.jpg
http://pitbullguitars.com/wp-content/uploads/2013/10/ljxj6-rigged-headstock.jpg
pablopepper
10-10-2013, 10:09 PM
Davocaster.
Reliced Sonic Blue finish.
Extras:
-Wilkinson high output Stratocaster pickups
-Wilkinson compensated brass saddles
-Schaller 5 way selector switch
-Volume and tone knobs removed and replaced with kill switches
-Single ply black pickguard
-Gotoh string retainer
http://pitbullguitars.com/wp-content/uploads/2013/10/6vq7r-Photo-27-04-13-5-38-56-PM.jpg
http://pitbullguitars.com/wp-content/uploads/2013/10/9d5b0-Photo-27-04-13-5-40-23-PM.jpg
http://pitbullguitars.com/wp-content/uploads/2013/10/343r8-Photo-28-04-13-1-48-34-AM.jpg
MetalMatt
02-01-2014, 03:49 AM
TL-1 kit finished in Wudtone Cherry Flamenco
Neck finished in Wudtone Colourless Neck Finish
Pearloid scratchplate
All other parts stock Pitbull Guitars
http://img.photobucket.com/albums/v472/oldval/telecaster/tele15.jpg
http://img.photobucket.com/albums/v472/oldval/telecaster/IMG_7945.jpg
bargeloobs
23-10-2014, 01:16 PM
TL-1 PBG kit "Bladecatcher" DC Esquire
Grover 406 Mini Locking Tuners 18:1
Custom Chrome PUP Ring
Seymour Duncan SH-8b Invader Humbucker
String Through Body Hardware
Custom Neckplate
Custom Esquire pickguard & headstock racing stripe (Courtesy of Pablopepper :) )
Gibson Nashville TOM bridge
Bournes mini's 500K pots
0.047uF Orange drop Cap
Cloth wiring
CRL 3 way switch
Switchcraft Jack
Recessed round input jack plate
String retaining bar
Black Tusq nut
Plankspanker custom headstock waterslide decals http://www.plankspankerguitardecals.com/
Finished in Behlen Stringed Instrument Nitro Lacquer and Behlen Satin Black Nitro Lacquer/Toner with white pearl binding
http://i.imgur.com/5rMAlLE.jpg
http://i.imgur.com/ApmPaHi.jpg
http://i.imgur.com/ydjJkBi.jpg
http://i.imgur.com/myDnWdr.jpg
http://i.imgur.com/0OAFZA2.jpg
http://i.imgur.com/BxVJm5N.jpg
mikeyallcock
14-05-2016, 05:40 AM
This is my first attempt. All went well, I think I got lucky with the timber features.11254
just finished my Tele all went well except getting my earth and active round the wrong way to start wit.h. I have ended up with one very beautiful guitar
13762
michaelS31
15-04-2018, 11:34 AM
My Tl-1 'Charlie', with a few aftermarket upgrades. Artec filtertron clone in the neck, bigbsy and vibramate for the bridge. 5 way switch. Finished in dingotone uluru red (body) and bloodwood (neck). Finished a while ago but only recently got the headstock decal on!https://uploads.tapatalk-cdn.com/20180415/e2d8817bbd78b86d98f0664085ad7e73.jpghttps://uploads.tapatalk-cdn.com/20180415/e9e7081402f6773f2c734523505e3443.jpghttps://uploads.tapatalk-cdn.com/20180415/5abe7bfe1b2ec585e6ee0335c1f30a40.jpg
Sent from my A0001 using Tapatalk
Sonic Mountain
15-04-2018, 02:26 PM
Nice job. The bigsby just looks awesome huh? I barely use a trem but I'm pretty interested in trying one of these at some point.
I've never seen this thread before. Feel like the Sonicaster will fit right in.
michaelS31
15-04-2018, 02:28 PM
Nice job. The bigsby just looks awesome huh? I barely use a trem but I'm pretty interested in trying one of these at some point.
I've never seen this thread before. Feel like the Sonicaster will fit right in.Right?? I'm in the same boat, it looks so freaking good, but I barely use it musically. It's all about appearances ;)
Sent from my A0001 using Tapatalk
Rockfactor
15-04-2018, 03:20 PM
Me three. My Bigsby style trem is purely for the cool look.
Sent from my iPhone using Tapatalk
wazkelly
15-04-2018, 07:20 PM
Not sure how well one would work on that traditional 3 saddle Tele bridge?
Robevans2121
19-02-2020, 05:18 PM
My first TL-1 build... Tele body, Strat headstock (sorry to the traditionalists, but have never liked Tele headstocks) so the name Strelecaster seemed appropriate... this was great fun and three generations of the family had a hand in finishing it. Stain is Dingotone Bushfire Sunrise. Above all I wanted to know if it was possible and it was (with a $50 local guitar tech setup for intonation and action).
33836
33837
Mike.L
05-04-2020, 08:27 PM
My first build custom painted by myself in blood red candy marble effect with a black fade, neck stained with golden teak stain and finished with tru oil.
Rossco911
06-02-2021, 09:23 AM
Hi Adam
I know that this is an old post, but I was wondering where you get your Wudtone from? I'd love to stain my Tele Kit just like you have using Wudtone Butterscotch.
Cheers Ross
GeorgeC
17-03-2022, 11:14 AM
This T-style, called "Brave Heart", was hand-painted on the body, using acrylic paints. The knot and snake patterns on the back were hand-painted, combining Celtic and Australian motifs from my life-journey. The Scottish flag is also painted in acrylic. On the clear pickguard, the image of William Wallace is reverse-printed to clear label material from a photo image, then applied to the reverse side. The body, neck and headstock were sealed with multi-layer guns stock oil, then the whole guitar was heavily reliced, using sandpaper, a beer bottle (to hammer sections), and graphite dust to darken. The guitar is converted to a string-through bridge.
decibelboy
17-10-2022, 10:12 AM
Here ya go.
Stained blue with kids acryllic paint, then dingotone clear stain set over the front and the blue (also used on the neck).
Tonerider alnico 2's and then basically 2 on of switches (1 for each pickup) with associated volume.
"Gold" leaf on the front of the headstock, which I have found develops an interesting patina as the guitar ages,
HitTheGauss
26-10-2022, 11:52 AM
My first ever kit build: a Pitbull TL-1 (https://www.pitbullguitars.com/shop/guitars/pit-bull-guitars-tl-1-electric-guitar-kit/). I was going for a seafoam green look using Montana MTN94 acrylic paint (matt) with a Montana 2K varnish clear coat. The maple neck and fingerboard were finished with multiple coats of TruOil with no stain. The pickguard needed to be trimmed to fit (I went a bit overboard trimming around the control plate but I plan to redo it at a later date!). Nonetheless, I'm still happy with the final result (it sounds good too!) :D
Extras:
- Wilkinson bridge
- Grover 406c tuners
- Bootstrap Extra Crispy pickup set
- Bone nut
- White pearloid pickguard
43715 43716
MSG953
19-07-2023, 11:57 PM
Just finished my TL-1. I rushed the paint job because I loathe painting. 4 coats of rattle can Pastel Peppermint and 2 coats of rattle can Clear Gloss.
Head stock is similar to my 1982 Vantage Avenger, which I think is much better looking than the fugly Fender one. Anyway, it plays and sounds pretty good thru my Orange Crush amp with my Line 6 Floor Pod providing heaps of amp emulations. Here's a pic or 3. Ummm, no pics, as I can't figure out how to add them.
ElleBrooke
22-07-2023, 01:42 AM
My son and I collaborated on this one: he did the hard part (all the building), I just did the art and sealing.
All Pitbull stock except for the black pearloid pickguard. Wood burned, painted with acrylics, then finished in wipe-on gloss poly on the body, and satin on the neck.
https://i.imgur.com/DkjBFto.jpg
https://i.imgur.com/PJXfiki.jpg
https://i.imgur.com/481KY0x.jpg
https://i.imgur.com/XECAy1n.jpg
https://i.imgur.com/ZENa1ej.jpg
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.