wokkaboy
10-08-2013, 12:19 AM
Hi all,
this has been a long project, started as a lump of oak I found on a verge covered in ugly green lead paint, and this is what turned out. It's the thickness and weight of a Les Paul and early test play it sounds good. I just used the neck and hardware from a PBG SG-1F kit. It's my 1st scratch body glue in neck so nervous moments getting the neck glued in the right position !
I gave the body heaps of curing time between gloss coats and the finish is quite glossy.
http://pitbullguitars.com/wp-content/uploads/2013/08/7yvcb-2013-08-08-23.47.44.jpg
http://pitbullguitars.com/wp-content/uploads/2013/08/dh1r7-2013-08-08-23.48.03.jpg
this has been a long project, started as a lump of oak I found on a verge covered in ugly green lead paint, and this is what turned out. It's the thickness and weight of a Les Paul and early test play it sounds good. I just used the neck and hardware from a PBG SG-1F kit. It's my 1st scratch body glue in neck so nervous moments getting the neck glued in the right position !
I gave the body heaps of curing time between gloss coats and the finish is quite glossy.
http://pitbullguitars.com/wp-content/uploads/2013/08/7yvcb-2013-08-08-23.47.44.jpg
http://pitbullguitars.com/wp-content/uploads/2013/08/dh1r7-2013-08-08-23.48.03.jpg