My Kit continued

HI!
Well Brendan & Pro finally got out of welcome and in to where I should be.
Tomorrow I'll sand inside the "f" hole and TRY to make that look reasonable. (some how, there is a lot of sanding to do in there)
Maybe bolt the neck to the body. Here is another 3 pix, nothing spectacular, but should take a few more as it processes.

http://pitbullguitars.com/wp-content/uploads/2013/07/5do2c-DSC_03101.JPG
http://pitbullguitars.com/wp-content/uploads/2013/07/78476-DSC_03131.JPG
http://pitbullguitars.com/wp-content/uploads/2013/07/3i7d0-DSC_03181.JPG

Well, out came the sandpaper, after 4,003,221 tears later (still remember you Judy) I finally got it to what I think is ok, then put some of the neck base coat in there , well at least there is no great big ridges.
first pic the series of ridges.
2nd pic, not the worlds best sanding block.
pic 3 that will do.
Tomorrow, install pickups', hardware, and solder, ummm strings and set up.HEY THE END IN IN SIGHT.

/Users/rickmoffat/Desktop/DSC_0329#1.JPG/Users/rickmoffat/Desktop/DSC_0328#1.JPG/Users/rickmoffat/Desktop/DSC_0328#1.JPG