dingobass
17-11-2012, 12:34 AM
For those of us who prefer bone nuts on our Guitars and Basses, the Stewmac String spacing rule is a very handy tool too have.
This easy to use rule gives a compensated string spacing layout.
What this means is the bottom end strings are spaced apart slightly wider than the top end, thus compensating for the thickness of the strings.
This gives a more even feel to your set up.
How this rule works is very simple.
First, mark the position of the two outside strings ( Guitars,usually 3- 5 mm, depending on guage and personal preference, Bass 4- 6 mm).
Then take the rule and slide it along the two marks until you can see them through the slots on the rule.
You will notice that there are two series of slots, one close to the edge and the other set back.
It is important to ensure that when you are lining up the rule that you are sighting through the same series of slots, if you dont, you will end up with a very funky spacing! :D
Remember, Bone for Tone! 8-)
http://pitbullguitars.com/wp-content/uploads/2012/11/ceg85-IMG_1109.JPG
This easy to use rule gives a compensated string spacing layout.
What this means is the bottom end strings are spaced apart slightly wider than the top end, thus compensating for the thickness of the strings.
This gives a more even feel to your set up.
How this rule works is very simple.
First, mark the position of the two outside strings ( Guitars,usually 3- 5 mm, depending on guage and personal preference, Bass 4- 6 mm).
Then take the rule and slide it along the two marks until you can see them through the slots on the rule.
You will notice that there are two series of slots, one close to the edge and the other set back.
It is important to ensure that when you are lining up the rule that you are sighting through the same series of slots, if you dont, you will end up with a very funky spacing! :D
Remember, Bone for Tone! 8-)
http://pitbullguitars.com/wp-content/uploads/2012/11/ceg85-IMG_1109.JPG