Activity Stream

I have one diamond and one toothed and I had two necks to crown, so I thought I'd share my experience. Here's what I was using for the two necks:...

Toothed files

Welcome from another US member ;-)

FWIW, it's good to check the length to the 12th fret. It should be 15 inches on a "perfect" 30 inch scale bass neck... My old short scale bass was...

So it does travel ;-) Takes the name from the early Mustangs, but we still use if for small-ish muscle cars with a long hood, a short trunk and a...

I see! Thanks for starting the diary. Will be anxious to see how you like it... My first bass was a short-scale Epiphone Newport, which was...

Greetings from Galicia, and congratulations on your first assembly. That’s an exciting step. Taking the time to prep the wood properly makes a big...

For those of a younger vintage the 1960s Mustangs and other horsey name cars were known as "pony cars"

PB-30 Short 30″ Scale Electric Bass Guitar Kit

PB-30 Short 30″ Scale Electric Bass Guitar Kit

Welcome aboard Tino! Look forward to seeing your build.

Fantástico!

I'm not sure about the pony part. But pony-tar sound much nicer than Guit-ony! What about Guit-tang, or ferra-tar? No! No!

Hi and welcome Marvin. Are you a guitar builder, or thinking about becoming one?

There ya go, mine is a PBH-4 at 34" as was my genuine L Series back in the 1960s

Those of us of a certain vintage recognise the pun

Working under deadlines today, but I got the Fret Guru file today. Couldn't resist trying it out on a couple of frets. I'll do a review and compare...

Racing strips, blurred logo, mustang on the neck plate, hot rod color. Looks like you've invented the pony-tar!* *This should make sense to...

Que tal! Bienvenido! Which kit did you get? Hope you will start a build diary. We like to follow builds, and it's helpful if you have any questions...

Hola. Welcome to the forum Tino. Good luck with your build.

Thank you very much