Activity Stream

Tracking info says the neck plate landed in Oz yesterday, so looking good for arrival next week sometime :) Peter

Holey block, Batman, I got the drill press to work! 2nd hole punch there just needs a slight shift left. Otherwise, this one's shaping up nicely. ...

Ok, I’ve decided to cheat a little bit. Two reasons. 1) I think 3 months is going to pass by faster than expected. 2) I’ve got some nice Indian...

first coat when I took the first pic I sanded it back and stained again After the cleaning (goof off and acetone) there was one more stain so 3...

I'd just try staining again. How many times have you stained it so far?

well I did 2 cleanings.. one with goof off and since my wife is a nail tech and I have access to pure acetone I used that as well sucked the color...

It may soften the binding slightly, but unless you are really soaking it in the stuff, it shouldn't be too much of an issue. I haven't heard of...

I'd make a flying lead for the pickup connection, with a 3.5mm jack socket on the end, so you don't have to solder the lead directly with the harness...

Simon, thank you for the very helpful answer. I was able to get the lead to not interfere with the thumbscrews, but it also required bending the...