Activity Stream

No rush, but hope you'll post when you know. I have a slowly percolating project in mind that will most likely result in the need for some pickguard...

We don't use the term "Imperial" in the US for two reasons. There's the obvious reason that we left the Empire somewhat acrimoniously. The other is...

SAE is Standard American English and it is a complete and utter stupid system. Started my apprenticeship in Imperial and became a tradesman in...

SAE - is that what you call "imperial" (feet and inches)? What does it stand for (i'm guessing "Standard American ....something". Yes I was very...

Just looked at the measurements... I do them in SAE measurements so I had to convert them to mm... Yours look pretty good. If the action feels good...

Sounds good! Will look forward to seeing it!

I am about to head into class (TD's not the only teacher here), and will read this more carefully later...but just looking at the last line, I am...

Here's my Clavinova pretending to be a B3 https://nevertoolate2.bandcamp.com/track/browne-bottle

Trevor, I apologize for missing your reply. I have never heard of the tinted grain filler, thanks for that tip, I'll definitely try that on my next...

was thinking of a Yamaha most things they make a usually good quality I'm a complete dumb dumb about them

Well I did it "differently". As the first guitar was all stringed up etc... I did the fretwork levelling on the newer guitar neck. This time I...

yeah - I've found a box that has some binding in it.. no idea what to do with it. If you want some, lemme know. Happy to help out

hmmm.. I might need to look at the costs.. I think the algorithm the site uses makes this very expensive, and unnecessarily so. It'd be probably 3-4...

G'day Mark, I have a Yamaha Clavinova CLP-121S that's about 25 years old that we got for our daughter when she was learning piano. It has...

Very interesting a Tim how about binding especially cream im always trolling eBay for it's sometimes its harder to find as rocking horse sh#t

Hmmm... That sound's like fun. Any idea what cost+shipping would be to the US would be?

Good to know. Plus, a great idea.

got a bit done I've got the es335 all sanded and finished putting new binding on it its ready to mask up and prime up I put new binding on the...

As long as the screw thread is mainly in the wood block it should not matter. Plus, no one will look inside :rolleyes:.

+1. I would normally sand up to 180 g or 240 g with for staining. I sand and then stain for my process. Have you considered the option of grain...

No worries, fender3x, thanks for the advice!

I should mention that I am not the greatest at staining, so others may want to chime in. I typically don't go finer than 220. The exception is on...

Thanks for the replies, everyone! fender3x, thanks for mentioning the grits. I plan to apply one coat of stain and then sand it down before...

Been pondering veneer racing stripes just to satisfy fenders seemly obsession with them :). What’s everyone’s experience with glue for veneer? I’ve...

Grey and bald omg work faster Dave :)

Playing slide on the ST-1 on this one

You could go grey waiting :D