Activity Stream

Spammer got through the gates - resurrected an old thread. Nuked them as quick as I could.

Physically and electrically its the same as the dedicated stuff just not as wide and it solders nicely to tie it together, I've used it on a couple...

Our finished beauty. Thanks to all for all the help.

Hi Beautiful finish - I can see the work you put in Where did you get the DR Neons from? Would look good on my TL1 project. Regards David

Try this: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F132327806774 Sent from my LG-H930 using Tapatalk

Thanks mate. Much cheaper than dedicated copper tape marketed for our desired purposes

https://www.bunnings.com.au/on-guard-4m-snail-and-slug-barrier-insect-trap_p3010314 Can still get cheaper on eBay..... but only marginally. ...

Got a link to this product? I can't find it on their website...I presume it would be cheaper too

Just a beaut! I ordered mine and can't wait! This will be my first attempt. Any advice on how you did the burst? It came out fantastic!

Hardware all installed, wired up and everything works. Surprised about how good it sounds even without a full setup. The Toneriders are good pickups....

Cancel above request--my grandson straightened me out on Tele's. One question remains, though. I have two yellow wires coming from the ground of...

I had never heard of that tape. Always ordered copper shielding tape from eBay. Thanks for the info. Sent from my LG-H930 using Tapatalk

Wet Sanded with 1200 and 2000 grit. Then some buffing with a foam pad... I think I'll leave it at that, lest I sand through the clear.

Congrats Nick. Any plans for using platforms like Minds, Gab and BitChute?

It's called "star grounding". I also do it, but I use a ring connector similar to the linked photo. ring connector - star ground FTR, that's not...

Thanks. I’m building an MKA-2 where everything is connected to the scratch plate. It would make future disconnecting easier, just releasing the...

Thanks Guys, Heading away for a month next weekend, pretty frustrated I can't get properly started on this sucka! Will start a build diary when I...

I've done something very similar in that I bunch my grounds together as much as I can, not as tidy as your idea, but same principle with no issues.

Ok...I may have been hasty. In another thread, I mentioned that I found a really amazing resource for bass wiring...

Welcome along Ryan - can't have enough bass!

Hi mate. Great choice of guitar kit! Re: the gap- I’d wait till the bridge is in. Re other builds. You can check out my build diary in the same...

Damn! That’s a smart one to keep in mind. Sent from my iPhone using Tapatalk

Most who flip the control plate move the vol pot to the front for volume swells, tone pot in the middle

Hi I have found that my ideas are sometimes a bit ahead of my capabilities but I have done some good things - I built a leather wrapped 24kg game...

I have alway believed that people can do more things, far better than they give themselves credit for. But fair call, you are the best judge of...

The scale length for a TL should be 25.5". Some people aim to have that scale length when the saddles are at their half way point, others aim for...

Hi Red Abalone - posted pics in my build diary. I'm continually beset with doubt - amazing how it never seems to be exactly like the you-tube...

Hi Drilled out the fretboard markers. Will be colouring neck with dingo tone bloodwood which should give me the contrast needed for the red...