Mark's PRS-1H Buid

[Bakersdozen]

Final shots look great BD. Can you do a quick summary of what is stock and what is upgraded. I went hunting through the Build diary and couldn't find what pups you ended up using and how the electrickery works.
Mine's taking ages, but I think its one of those builds that needs time put in.

No problems mate, will do. I'm aiming to do an audio demo tonight and will prepare all that info as I'll need it for Gotm and the gallery etc. Hopefully by tomorrow it'll be all up.

[Richy17]

Looks great finished. I’m still loving the carbon truss rod cover. This would not look out of place hanging on a wall in a guitar shop. It’d probably have one of those “please ask for assistance” tags 👌🏻

[vaxis85]

Wow man that's come up a treat!! Love the colour you went with. Good job

[Bakersdozen]

Looks great finished. I’m still loving the carbon truss rod cover. This would not look out of place hanging on a wall in a guitar shop. It’d probably have one of those “please ask for assistance” tags

Thanks mate! Appreciate the comments. I have a JTL-1 kit to tackle next so the Blasteroid build diary has been studied well!

[Bakersdozen]

Wow man that's come up a treat!! Love the colour you went with. Good job

Cheers mate!

[DarkMark]

What a little ripper. Well done, Sir!

[kuanjb]

Good job!

Don't think mine's going to come up anywhere near as nice as this one.

Sent from my LG-H930 using Tapatalk

[Bakersdozen]

What a little ripper. Well done, Sir!

Good job!

Don't think mine's going to come up anywhere near as nice as this one.

Thanks guys! Much appreciated.

[Bakersdozen]

Here is the list of upgrades done to this kit;
Grover locking tuners, mini rotomatics (PBG upgrade)
Tusq Nut (black XL 6060-00 to suit Epiphone)
MusicLily adjustable wrap around bridge
MusicLily Ceramic Humbuckers
Guitar Family Recessed Jack Plate
Switchcraft output jack
Speed Knobs

Electronics;
2 x BOURNS MINI 500K AUDIO TAPER POT
Orange Drop Cap
PBG Treble Bleed
2 x DPDT (on/on) switches
3 way selector switch (standard from kit)
Followed this wiring diagram
(ignore reference to push/pull pots - I used the mini DPDT switches in their place)

Finish;
Stain and intesifier coats of DingoTone Nullabor Ochre
The final coat didn't really take very well, so I stripped that back and went with Spray Poly (Cabbots exterior)
Dingotone Wax on the fretboard

[Bakersdozen]

Final shots look great BD. Can you do a quick summary of what is stock and what is upgraded. I went hunting through the Build diary and couldn't find what pups you ended up using and how the electrickery works.
Mine's taking ages, but I think its one of those builds that needs time put in.

See above post mate.