Thanks cork.
I should point out a couple of handy items that I used.
Highly recommended over the equivalent Dremel.
Had this now a couple of years and it's working like it's just out of the box.
Not to say everything Dremel is crap.
I got this the other day due to inclusion of the EZ lock system.
Works really well.
cheers, Mark.
Having read Bass Guy's build thread, (although Grant did something similar) I've stumbled upon another modification.
After looking at a few Jazzmaster jpegs, I'm going to carve away some of the lower bout which is a tad exaggerated in the JM-1.
I'm mainly concerned about getting it to sit better in a guitar stand.
cheers, Mark.
That makes sense as offsets tend to be a bit bottom heavy.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Looks so much better now.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8