Looks good in yellow and any alternative coloured scratch plate as that red is way too wrong.
Sent from my SM-A520F using Tapatalk
Looks good in yellow and any alternative coloured scratch plate as that red is way too wrong.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Oh yeah baby!
That would look very sexy.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
So then it's a happy co-incidence. When in doubt, opt for the cheap way out.
Speaking of which.
Inspecting the headstock tuner hole placement...alas one was further away from his brethren...so.
Have had these suckers sitting on the shelf unused for quite some time.
Can't remember exactly how much but under $20.
Thing is they require an 8mm hole.
Fortunately I have a good supply of dowels left over from Pitbull build one.
cheers, Mark.
Yes, I like the way your MDF template sits and IMO the shape suits better than standard kit stuff.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Right again Waz.
I think the Jazzmaster one-piece is the direction to take.
After sleeping on it, I've decided to have another go...the lower rear section should follow the edge of the body.
I'll leave out the upper controls for the first iteration, however I'll change the 'Fender' style selector switch for the 'Gibson' style toggle.
cheers, Mark.