EX-5 Build Diary - My First Build Bridge Pilot Hole Question

[MusicStudent1]

Hello Everybody!

My EX-5 bass kit has been sitting unbuilt in its box for a year and a half! I didn’t want to start on it until I could see the project through. Now, I’m ready!

I’m going to sand and seal the body and neck today and let it dry all week.

I also need to plan for the bridge mounting with a test fit. Here’s the 1st question:

Do I NEED a drill press to drill pilot holes, or can I get away with using a hand drill?

I was going to buy a dremel drill press but I don’t think it’ll reach and doesn’t look like it’s necessary.
I’m going to take careful measurements for the bridge placement.

The finished project should resemble an LTD EX-104 except with a natural clear finished neck.