A few more!!
Very impressive. Glad it’s turned out so well for you.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Yeah that has come up great. The white pick guard on the grey really works well.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Looks great Marc. Very nice finish.
I know what you mean with the electrics. Had the same issues.
I also replaced the nut with a TUSQ lefty for a strat. Just needed to sand it down slightly.
Looks great!
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
Thanks Colin,
Out of curiosity what did you have to do to get the tone pots working?
Hi Marc
On mine the active wire was soldered to the outside lug. I moved it to the centre lug and also removed some stray solder that was earthing to the case.
The photos on page 2 of my build diary show the tone pots correctly soldered.
http://www.buildyourownguitar.com.au...?t=7789&page=2