Mock build without drilled holes

[Derek82]

Hey peeps.

My Gtl-1 kit doesn't have any holes drilled. Is there any advice you could give with these sort of kits? Alignment checks should be ok but I'm guessing that intonation will be another issue entirely with this as I'd prefer not to do anything to it if for some reason I need to return it.

Cheers,
Derek

Sent from my Moto G (5S) Plus using Tapatalk

[FrankenWashie]

Hi Derek,

you could always mask mask off where your bridge should go for the mock build and clamp or use the masking tape/CA glue trick to keep it where it needs to be. Just make sure you put a double layer of tape between the body blank and the CA glue, that stuff wick everywhere.
if you post photos of what you have, it may get further commentary from someone who has had similar issues.

[Derek82]

Thanks FrankenWashie,

Sounds like a plan!


Sent from my iPad using Tapatalk