New guy can't decide on first kit

[Richy17]

You're all a bunch of enablers http://www.buildyourownguitar.com.au...837#post169837

[FrankenWashie]

You're all a bunch of enablers http://www.buildyourownguitar.com.au...837#post169837

I’m pretty sure that should be a scrolling banner on the web site.

[Old Tooth Hopkins]

As someone who is just getting into the first build, some considerations should go towards how easy it is to build...

for example, a guitar kit with many contours will require a lot more attention to the sanding, whereas something like a tele will have more straight edges. Even so, the edges took me AGES on my tele kit...

Also set neck vs. bolt on....i haven't build a set neck one but it feels like the neck is make a break - if you don't do it right there is no reprieve.

A couple of pitbull custom shapes like the dedman model seem pretty neat. Have a look at them too?

[blinddrew]

Also set neck vs. bolt on....i haven't build a set neck one but it feels like the neck is make a break - if you don't do it right there is no reprieve.

Well, if you use the right glue you can steam it apart. But I wouldn't like to have to do it.

[Fretworn]

I’m pretty sure that should be a scrolling banner on the web site.

I used to frequent a band message board that had “Cheaper than a therapist or a bartender” at the top of the page under the board name. Not sure that it applies here though........