Looking for tips on removing glue spots and finishing VERY thin veneer.
Looking for tips on removing glue spots and finishing VERY thin veneer.
Be VERY careful?
First (proper) build: http://www.buildyourownguitar.com.au...ead.php?t=8546
Second build: http://www.buildyourownguitar.com.au...ad.php?t=10229
yep, careful use of Goof Off . If you are doing a dark stain you can also disguise glue spots with careful colour matching with modelling paints and a tiny brush. I've used both Tru Oil and auto acrylic over the top of water based modelling paints
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Thanks! I thought I'd seen a reference to goof off somewhere. I'll give that a shot. Also, be careful. Check!
Depending on the marks, and the surface, you might be able to scrape them off with a cabinet scraper or similar. I used the back of a lino knife on mine.