Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 59

Thread: Witto's rc-1 project (first time builder)

  1. #11
    Member
    Join Date
    Mar 2018
    Location
    Sydney NSW
    Posts
    94
    Decided to bite the bullet this week, and set the neck.

    Some careful sanding on MOnday night, with 360 and a straight block on both sides of the pocket. sand a bit one side. test. sand a bit the other side. test ... etc... eventually we got there ! Neck seats in pocket with a firm press required.

    scale lengths seem to check out pretty well. (not sure just how accurate these need to be).
    High and low E seem well centered over the neck.

    Glued and clamped the neck in place last night. (Might have accidentally added 0.5mm or so to the length... Time will tell).

    HOW long should I keep the clamps on ? and how long should it take for the joint to cure to full strength ?
    (I used the glue I ordered with the kit, from PitBull).

    I'm going to try and post a few photo's today... havn't had much luck with that so far... (I think my images are too big)

  2. #12
    Member
    Join Date
    Mar 2018
    Location
    Sydney NSW
    Posts
    94
    AHA! Got this photo thing sorted now !

    some photos of the finishing so far ...

    Click image for larger version. 

Name:	buttend.JPG 
Views:	290 
Size:	241.8 KB 
ID:	26465

    Click image for larger version. 

Name:	stripes.JPG 
Views:	279 
Size:	253.8 KB 
ID:	26466

    Click image for larger version. 

Name:	clamp1.JPG 
Views:	266 
Size:	297.3 KB 
ID:	26467

    Click image for larger version. 

Name:	body2A.JPG 
Views:	295 
Size:	276.0 KB 
ID:	26468
    Last edited by wcieslik; 15-05-2018 at 11:25 AM.

  3. #13
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    not bad at all Witto, is the racing stripe a paint effect or did you vinyl/tape it? Looks schmick!
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  4. #14
    Mentor Adam Barnes's Avatar
    Join Date
    Feb 2017
    Location
    norah head nsw
    Posts
    613
    Very nice witto

  5. #15
    Member
    Join Date
    Mar 2018
    Location
    Sydney NSW
    Posts
    94
    Quote Originally Posted by FrankenWashie View Post
    not bad at all Witto, is the racing stripe a paint effect or did you vinyl/tape it? Looks schmick!
    the stripes are painted. duplicolor green apple, hyundi. im using duplicolor auto paints in rattle cans.
    ive made loads of mistakes along the way but learned much. The next one will be much better.


    im not sure how long to keep the wood clamps in place and how long it takes for DB's glue to cure ?

  6. #16
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    I would leave it at least 24hours or so after you had set it. Most of the common glues need at least 12 hours
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  7. #17
    Member
    Join Date
    Mar 2018
    Location
    Sydney NSW
    Posts
    94

    set time

    Quote Originally Posted by FrankenWashie View Post
    I would leave it at least 24hours or so after you had set it. Most of the common glues need at least 12 hours
    thanks Frank. yeah... I'll leave it for another night and day. that will give it 48 hrs undisturbed. looking fwd to getting the clamps off and holding it like a guitar instead of two bits wood.

  8. #18
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Exciting part of the build and hope setting the neck went well.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  9. #19
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by wcieslik View Post
    thanks Frank. yeah... I'll leave it for another night and day. that will give it 48 hrs undisturbed. looking fwd to getting the clamps off and holding it like a guitar instead of two bits wood.
    Igor wants to add “You leave the clampth on until the bugger tellth you where the money ith buried” I’m not quite sure what he means by that..😵🤫🤪
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  10. Liked by: wazkelly

  11. #20
    Member
    Join Date
    Mar 2018
    Location
    Sydney NSW
    Posts
    94
    If he doesn't spill soon, I'll play Smoke on the water at him till he bleeds!!

Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •