Cheers Andy, we’ll see how it goes. If it doesn’t work out, then it may be heads off for Igor!
Cheers Andy, we’ll see how it goes. If it doesn’t work out, then it may be heads off for Igor!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Very slow progress,
Checked bridge height with the neck clamped in, if anything it was too low and too loose.
So I modified a StewMac Ebony/Maple one to give me a little extra height and allow for shaping.
Don’t even ask what’s going on here. Just a little more FrankenLab silliness.
Hopefully get into masking up for pain soon
Edit: PAINT. Masking up for PAINT.
Sent from my iPad using Tapatalk
Last edited by FrankenWashie; 09-12-2018 at 01:45 PM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
lol masking up
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Aaaaand sanding....and scraping....and planning inlay.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
And a little experiment with inlay...
You’ll have to imagine the front face of the headstock black, as it will eventually be.
I plan to put a corresponding one on the TRC and then a script logo between the two.
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
I personally prefer inlay over decals. Looks like MOP of some thickness? Will stand out nicely against a black background. Does this mean it will be black paint? I’m yet to figure out how to remove stain from on top of an inlay without making a mess of the headstock, and then clear coats taking up stain and going back over the inlay.
Headstock will be black, the overall scheme will be a burst similar to your ES 1. I need to make the edges da rk to hide the whoopsie that happened with the battery box rout.
The signature/logo will be a decal, just need to do some AI work to get it to look right for the guitar, my standard Hex logo won’t look right on this build.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.