On the plus side I can confirm that that kit is super solid.
It could be “re done” a few times and not show any wear.
Sent from my iPhone using Tapatalk
On the plus side I can confirm that that kit is super solid.
It could be “re done” a few times and not show any wear.
Sent from my iPhone using Tapatalk
Tele Deluxe: http://www.buildyourownguitar.com.au...ht=tele+deluxe
Johnny Ramone:https://www.buildyourownguitar.com.a...=johnny+ramone
ES2V:https://www.buildyourownguitar.com.a...?t=7455&page=9
DMS-1 Mustang: https://www.buildyourownguitar.com.a...=10548&page=12
AG-1 Perhaps i am Tony Iommi: https://www.buildyourownguitar.com.a...t=11537&page=7
Cheers for the moral boost fellas. My main problem from the start with this one was that I was basically being a bit of a bull at a gate so to speak and not taking my time to think through the processes properly.
The plan is still very similar but im going to use the tru oil on the top this time around instead of the DT colorless. I still have a bit of sanding to do at this point. It took a fair bit of effort to take the clear off the top. Even after a few weeks it was still not cured under the clear as was pointed out in an earlier post.
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
I finished the 2nd round of sanding today and decided to start on the top with Tru-oil, 2 coats on so far.
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
Back from the dead looking better than before!
Sent from my iPhone using Tapatalk
Tele Deluxe: http://www.buildyourownguitar.com.au...ht=tele+deluxe
Johnny Ramone:https://www.buildyourownguitar.com.a...=johnny+ramone
ES2V:https://www.buildyourownguitar.com.a...?t=7455&page=9
DMS-1 Mustang: https://www.buildyourownguitar.com.a...=10548&page=12
AG-1 Perhaps i am Tony Iommi: https://www.buildyourownguitar.com.a...t=11537&page=7
lookin good Grubsta
RedPine Lapsteel - March 2017
http://www.buildyourownguitar.com.au...hlight=redpine
JB4-A - March 2018
http://www.buildyourownguitar.com.au...ead.php?t=8006
On my phone it looks like the glue lines are not as prominent.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
3rd coat on and it really is looking nicer this time around.
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
Almost a goldtop without the gold!