Nice and tidy project all done so quickly & efficiently.
Nice and tidy project all done so quickly & efficiently.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
One thing I did come across was the need to put a piece of shimming material under the neck heel when I fitted it to the body, that was to get the action a bit lower, it's still a little too high so I might put another piece of shimming material under the neck heel and see if that sorts it out.
I decided to swap out the Squire Telecaster neck for the Andoer neck I was originally planning to use, had to do quite a bit of sanding on both sides of the neck heel to get the Andoer neck to fit in the neck pocket, also had to literally saw-off about 10mm or so from the end of the neck and remove the 22nd fret, just to get the saddles to intonate correctly, boy was that a job and a half, fortunately the saw I used made it a bit easier, the neck heel is still a bit too thick by about 2mm or so, but it all seems to be working, a made of mine is going to be giving me a chrome ashtray-style Telecaster bridge plate soon, so once I have it I'll swap out the bridge plate I used for the ashtray bridgeplate, hopefully that'll fix the issues with the string holes as well as the saddle intonation, as it is now, the Custom Telecaster is quite playable.
Here's what it looks like now with the Andoer neck fitted, the saddles are a set of chrome ones I bought from Realtone Music:
Last edited by DrNomis_44; 26-12-2018 at 09:30 AM.