Can anyone confirm if the after market bridge posts for Tunematic upgrades are the same thread/size as the kit ones?
I'm thinking of replacing the bridge on my SG with a Gotoh one as it's rattling a bit and I'd rather not have to pull the post receivers out.
The distance between the post centres on the kit appears to be 74mm. So I am assuming this one would fit:
http://luthierssupplies.com.au/produ...oducts_id=2198
Choosing the Tunematic with Standard posts option.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
I use Gotohs to replace the kit ones and am sure they are the same thread. Have used the bridge on the kit posts with no issues as well. Have some at home and can definitely confirm after work if you wish
Tony
Awesome, thanks.
I figured they would be, but doesn't hurt to check.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Sonic, confirmed the posts on the Gotoh will screw into the kit insert.
Tony
Excellent. Thank you for checking that for me
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Posting Permissions
Reply With Quote