Results 1 to 5 of 5

Thread: DM-1S with 2 pickups?

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    Maroubra NSW
    Posts
    8

    DM-1S with 2 pickups?

    The DM1S comes stock with a single P90. Is there any reason why it couldn’t be offered as a dual humbucker, or 2 P90s? Like a PRS Santana for example? Looks like only a little bit of routing would work. It would create a very versatile guitar, depending on the pickup choice and whether you wanted to throw your pickups out of phase etc... I just love this body style.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Not another guitar?!!
    Pitbull STA-1 ash (“the other woman”)
    1974 Fender Strat sunburst
    2013 Fender Tele Select carved maple
    Jackson Randy Rhodes w Seymour Duncans
    Fender Squire Tele: the guineapig
    Vantage VP 700 (still going strong!)
    Guild flame maple arched back jumbo acoustic
    Maton ECW80
    Takamine 12 string
    Ukulele
    Banjo
    Banjo mandolin
    Phew!
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2. #2
    Overlord of Music Dedman's Avatar
    Join Date
    Mar 2016
    Location
    The "Fabulous" Gold Coast
    Posts
    3,566
    shoot Adam an email, I'm pretty sure you could get it with any pick up routes you wanted on special order
    Build 19 PSH-1 Kustom
    Build 18 HB-4S Kustom
    Build 17 WL-1 Kustom
    Build 16 TL-1TB Kustom
    Build 15 PBG-2-
    Build 14 FTD-1
    Build 13 RD-1 Kustom
    Build 12 DM-1S
    Build 11 MKA-2 -
    Build 10 Basic strat
    Build 9 JM Kustom
    Build 8 FV-1G
    Build 7 ES-2V
    Build 6- Community prototype
    Build 5 LP-1LQ
    Build 4 ES-5V
    Build 3 JR-1
    Build 2 GD-1
    Build 1 TLA-1

  3. #3
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    Looking at the neck detail, any neck pickup would probably have to be moved back from the neck by at least 1cm, rather than touching it as is normal. The body has a fairly thin supporting tenon at the bottom, nut otherwise the neck/body contact area is quite small. If you rout out a cavity that removes the back of the neck pocket, then you've lost a lot of glued contact area and the neck joint becomes a lot weaker. So you'd need to move any pickup rout back a bit so there was still a back to the pocket with enough thickness for structural integrity.

    Of course you could make a different neck with a tenon that sticks into the rout, like a lot of the other glued necks do, but that would move away from using the kit 'as is' (though maybe another standard neck with a paddle headstock could be fitted which had such a tenon and there weren't any bridge/scale length issues).

  4. #4
    Overlord of Music Dedman's Avatar
    Join Date
    Mar 2016
    Location
    The "Fabulous" Gold Coast
    Posts
    3,566
    they are bolt on neck Simon.
    Build 19 PSH-1 Kustom
    Build 18 HB-4S Kustom
    Build 17 WL-1 Kustom
    Build 16 TL-1TB Kustom
    Build 15 PBG-2-
    Build 14 FTD-1
    Build 13 RD-1 Kustom
    Build 12 DM-1S
    Build 11 MKA-2 -
    Build 10 Basic strat
    Build 9 JM Kustom
    Build 8 FV-1G
    Build 7 ES-2V
    Build 6- Community prototype
    Build 5 LP-1LQ
    Build 4 ES-5V
    Build 3 JR-1
    Build 2 GD-1
    Build 1 TLA-1

  5. #5
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    Quote Originally Posted by Dedman View Post
    they are bolt on neck Simon.
    D'oh! How could I miss that! My stupd mistake. Even so, I'd recommend that PBG or the factory tries a humbucker neck rout first to see if there is a serious weakening of the neck joint area. The joint is fairly far forwards and you'd be removing a lot of support for it by a neck rout, especially one that went right up to the neck. The neck might then become fairly flexible (it happened with the LP Jr double cut specials). It may not, but I'd suggest at least one test construction to check this before offering a dual pickup option as standard. And if the right against the neck rout was weak, then see what a rout 1cm further back did.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •