I'd certainly sand those surfaces down so there's fresh wood for the glue to adhere to. It's the cellulose in the wood that it bonds to, so the new glue doesn't want to be applied on top of old glue.
I'd certainly sand those surfaces down so there's fresh wood for the glue to adhere to. It's the cellulose in the wood that it bonds to, so the new glue doesn't want to be applied on top of old glue.
Fingers crossed Adam,hope all goes well. The pick up covers look sensational.
Wayno.
Build-1 ES-3 June 2016 GOTM.
Build-2 IB-1S
Build-3. ES-12G June 2019 GOTM.
Build-4 Gene Simmons axe bass. 43 year project done.
Build-5. TL-1S May 2021 GOTM joint winner.
Don't forget to drill any mounting holes before you do any wire winding. You'll need them to fix the bobbins on whatever going-round mechanism you plan to use.
And have the wire reel on the floor, so the wire just runs up from it. Don't put the reel on a horizontal spool so that the wire also rotates the reel. The extra tension can break the very thin wire.
Looking good Barnsley, better you than me building your own pick ups. Thank goodness the neck came out cleanly.
Wayno.
Build-1 ES-3 June 2016 GOTM.
Build-2 IB-1S
Build-3. ES-12G June 2019 GOTM.
Build-4 Gene Simmons axe bass. 43 year project done.
Build-5. TL-1S May 2021 GOTM joint winner.