Hi folks,
Thanks FrankenWashie, the pics were exactly the same as I had set out.
So the neck is screwed into position, the strings are on and now the fiddle bit getting everything just right. On the whole, the setup is just about perfect. The high E string is about 1.5mm higher than the low E which means a very small adjustment of the post screw that the bridge mounts against. One thing I did learn in my surfing was to release all pressure off the bridge, strings and springs before adjusting these screws as if you don’t do this, you tend to stuff up the knife edge.
So it’s all finished and playable. Now for the fiddle adjustments to get it perfect.
Am trying to get some pics on my camera to upload to my laptop where I can adjust the size to be able to post. Can’t workout how to do that in this iPad thing.