Ha haha it has a Regina
Ha haha it has a Regina
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
I have the same kit coming to me in Colorado US. I hope I dont have to worry about shipping here. Service has been deteriorating as well. I don't know what the exchange rate is US to AUD but Stewmac has a large stock of headstock veneer. Best to always buy local if you can.
Loon
I ended up staining the headstock rather than use a veneer.
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Sweet! I am going to have to ramble through the threads to see if there are implications of adding 2.3 mm of material to the headstock when considering tuners, nut string height etc. (The Junior was supposed to be a student guitar!) Staining may be the way to go for me also?
Staining probably easier
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Fretwork tonight. Leveled, recrowned and polished.
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Few thing done one the Junior lately
Grovers installed
New bone nut installed
Neck set - as my first set neck, this was a little scary!
Wiring harness done - CTS pots and Sprague Orange Drop Cap
Next item is the GFS pickup I have coming
Build 1: Non-PBG Flamed Maple LP - Wine Red
Build 2: JRM-1DC - The Butterscotch Belle
Pedalboard Build
Looking really nice mate. That builders string works really well for aligning necks.