looking great Jeff, what's the next step ?
looking great Jeff, what's the next step ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Considering sanding back the front and staining it the same as the back. I'll sleep on it!!
The more I look at it, the more I love the cedar stained back but not all that impressed by the front....Sanding has begun.
1st sand with 180 grit
Unfortunately, during that action, the body slipped off my lap and bounced on the concrete!!I did a sand back to see how deep the damage was... into the wood. 2 other points where it bounced were mainly on the binding.
Well, this is gonna take some time to fix!
Oh BUGGER!
I think we've all been there, I dropped the silent build on its headstock 2 nights ago. At the least it's proved my scarf joint is strong.
That should clean up okay once you've recoated though. Bummer that it happened.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Ah, this is doing it for me!!
2 coats of FW cedar.
If it comes up like the back and sides its going to be schmick!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looking great!
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
Mock assembly with new GF Dream 180 Vintage pickups.
I'll get another coat of Danish oil on today.
Any suggestions about inside the F hole cavity?? Leave it blonde or can we get some colour or black or.... ???