Starting the sanding.
1st coat of Natural stain
After a few coats of Natural, I thought it was still too pale, so I applied a few coats of Danish Oil
Then a few coats of Walnut satin (Stain & Varnish)
Of course, sanding after each coat had dried.
Neck post I'll cover the neck and back of body stain.
nice start Jeff, no need to sand much between early coats. Build up thin layered coats and towards the end you will flatten the coats after a few clear coats
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
With the help of some mates, Felix & John, I had the paddle roughly shaped then spent some time with the sandpaper getting the shape right.
Getting the sanding right.
1st coat of Danish oil
Thanks Wokka. I'll start asking questions soon. I'm flying blind so far.(well not entirely... I've benn watching youtube vids and reading build diaries here. Yours & wazza's have been extremely helpful.)
This is my first build, 1st attempt at woodwork, 1st attempt at staining timber. I still wanna attempt to get a decent finish.
no worries Jeff the headstock is looking good, bit of a mashup with a strat shape on a tele but all good.
What clear stain are you using Dingotone ?
keep building up thin coats with at least 3 days curing time between coats and you will have a nice darker natural look
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I used Dingotone for the first 2 coats on the front side of the body, added a few coats of Danish oil, then a few coats of Walnut satin stain.Originally Posted by wokkaboy
The neck I've done with about 5 coats of Danish oil. Fretboard, 2 coats Danish oil.
PS I've always like the Strat head on the Thinline Deluxe. I know this isn't (quite) a deluxe, but close!!!
Great diary so far - keep em coming.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Please note, this is about 2 weeks into the build. I've been collecting photos and have only just learned how to post them onto this site. Huge thanks to Sonic Mountain for that info.
I've done quite a bit of work on the back of the body and it's just starting to get glossy. I'm rapt! Will start posting tomorrow.
No dramas, you are on to it now.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Posting Permissions
Reply With Quote
