Cheers,
Adam
adamboyle(at)pitbullguitars.com
Franky wait and see what Ads says, maybe he will or maybe he will return the 25.5" scale necks for the 30" necks.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'm just stirring Wokka. I do have a JM project in mind, but I also have a stack of African Mahogany and American Maple lurking in the Frankenlab vaults. It will likely be a scratch build.
Edit: That is of course assuming the bride doesn't find my wood stash and order it turned into a craft center or some such....
Last edited by FrankenWashie; 14-12-2017 at 10:38 AM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha no worries Franky, sounds like you have months worth of projects on the go anyway
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'm actually moderately heartbroken. I literally sold two guitars to buy a kit. Ah well. Maybe the factory could have better luck making conversion necks for guitars and basses? A 30" conversion neck on a bass with no tuner holes drilled could be a good start for a Bass VI style creation.
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
Any updates on this yet, I responded to a question on FB Kit Builders saying it was in the works but couldn't name a date