Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Would I be correct in now doing a rub over with a micromesh pad soaked in water with a drop of washing up liquid in, then do 2 coats of 50/50 tru oil on the neck to finish it and the fretboard... I think the basswood body still needs a gallon lol.... will let that dry till the weekend before another coat
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
Neck is done... 4 coats oil..2 @ 50/50, smooth as silk... body had 6 coats.. rubbed over with a moistened micro mesh pad after 5... now for a few more.. Dingo wax on the neck after a week or so?
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
I really love that yellow, this is looking very cool Chrissy!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
ill second that going to come out real nice im a bit of a yellow guitar fan
Can obviously see the 3 different planks though... the pickguard will cover a lot, but wish it was a one piece body lol....
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
about 10-12 coats on now, i think cant remember exactly lol... lovely shine already the pic doesn't do it justice
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
I used to wonder when you guys said you had spent a couple of hours polishing...... now I know.... put some dingo wax on and my arms are a falling off
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
Thought I was going to be almost there this afternoon... got the tuners on... fitted the pickguard, soldered the input jack, went and tested it on the amp with a screwdriver, well happy apart from the jack being a bit slack, took it out and the lug snapped.....
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]