Thanks for the tips. I'll try and see how it goes!
Sent from my SM-G935F using Tapatalk
Thanks for the tips. I'll try and see how it goes!
Sent from my SM-G935F using Tapatalk
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
Finally managed to remove that veneer. Was pretty good glue!
I ended up sanding, wetting, warming and scraping...
Anyway that was hiding 2 knots with cracks in the wood which are going to be perfect for the rough barn style look I want for this one!
Very happy I removed it.
I'm bow going to try to remove the soft grain with a brass brush on the drill as I saw somewhere on the forum.
Sent from my SM-G935F using Tapatalk
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
And here we go after 30 mins with the drill with wire brush.
Looking pretty good!
I'll do another session tomorrow when the drill batteries have recharged.
Sent from my SM-G935F using Tapatalk
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
That will have a very cool effect on the finish Fred, I like it. Reminds me of this.
Last edited by Joe3334; 23-09-2017 at 04:05 PM.
Geez Fred, that is a rather nice blank canvas now the veneer has been removed. Like the subtle weathered look you have already achieved. Makes the grain definition really stand out.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
With this build I wanted to replace the black plastic marker dots with something else.
I've considered paua, but I'm not sure it will work with the very grainy wood and I wanted something more 'industrial', so I've been looking for metal markers and I found some nice stamped blanks from a jewelry supplier. They don't do steel, so I got 8mm and 10mm blanks in argentium, which is a silver alloy. At around $1 a pop it's pretty affordable as I only need 9.
Just tried the 6mm and 8mm to see. I like it a lot more than black plastic but not sure which size will work best... what do you guys reckon?
Photos below
Sent from my SM-G935F using Tapatalk
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
Smalls for me Fred as the bigger ones are taking over a bit too much in my opinion.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Yep... I do find the 8mm dots a bit big too... I'll think about it a bit more.
And as I'm now thinking about modding this bass I've started looking at JPJ basses... a P pickup between the 2 J pickups.
Any of you guys have tried one of those?
I'm tempted... )
Seems hard to find a blank pickguard without pup holes or a J bass pickguard with a P pup hole... Any idea where these could be found?
Cheers
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
Is there enough space between the 2 J's to fit split P arrangement?
Love the sound of PJ combination as that is what is in the new Yammy fiver bought recently and same setup in a couple of 1970's Ibanez Basses that I once owned.
Never seen a J scratch plate with a P cut out and reckon that would need to be a Pablo custom job.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Not enough space... But I was thinking I could fit the P pup near the edge of the pickguard and set the neck J pup higher near neck.
I found a black J pickguard with a P pup hole but it's black... wanted to keep the white as the body will be black.
Do you reckon Pablo can cut a custom one?
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here