Hi Guys,
So today I wired up my LP according to the diagram on the PBG site.
Plugged it in and;
With the switch in the neck (up) position it the volume and tone are working
with the switch in the middle, the neck volume and tone pots are working, the bridge volume pot works though it seems not through the full range (it cuts out with the volume between 1-3 and 8 -10 or there abouts)
With the switch in the neck (down) position i have nothing.
As far as i can see all wiring is in the correct position.
The grounding wire to the back of the pots doesnt follow the exact path shown on the diagram though it does cove all bases in a loop.
If anybody has any ideas id be very appeciative.
Thanks in advance
Milty