for not much more you can buy an actual compressor that will pump up tyres and stuff and an air brush for $25 from ebay
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Yeah saw that, I've got a couple of their cordless power tools and have had no problems with them.
I got my airbrush from that unmentionable green shed and run it off a bloody big belt drive compressor that came from Supercheap plus a workshop quality regulator/moisture trap so whole kit cost a few bucks more than the Aldi one.
If using a setup like mine which is set up for HP sprayguns and air tools make sure you keep the pressure around the 20psi mark and not much higher.
I found that some of the plastics used in the cheap stuff don't get along with with thinners and solvents, best stick to water based paints
Last edited by dave.king1; 15-07-2017 at 05:13 PM.
Funnily enough, I bought an airbrush today. From the shed that shall not be named.
Looks very much like the one in the Aldi ad. $98.
It's an Ozito brand. I guess they come from the same Chinese factory.
As for a review, well as I have no idea how to use one yet, I'll not offer an opinion.
Col.
I admit that I am an agent of Satan, however, my duties are largely ceremonial.
\m/
this is what I use mostly. I have larger one as well but rarely use it.
http://www.ebay.com.au/itm/Air-Brush...item58faad64f3
my compressor is one size up from this, but this would do and still pump up tyres and footballs etc
http://www.ebay.com.au/itm/Scorpion-...YAAOSw3ydVi8UI
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
The beauty of the Ozito one I have is that the paint doesn't go through the trigger / air path so much easier to maintain
I got the 300 piece hobby kit yesterday for around $17, Fits the dremel like a glove.
Don't know how long the various bits will last but for that price am willing to give it a go.
Also got the $12, 30watt soldering iron to replace my 15watt cheapo, worth getting just for the soldering station. haven't tried it yet so will see how it goes.
Worlds okayest guitar player.
I discovered my old 20w not that great anymore. Luckily I have a small butane one as well.
Sent from my Moto G (5) Plus using Tapatalk