Ohhhhh Barnsey, that looks wicked!
Ohhhhh Barnsey, that looks wicked!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Totally agree.Originally Posted by FrankenWashie
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
I also love it!
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Ive brought a small piece of .5mm quilted veneer one as a test peice and two to make a truss rod cover, what would be the best material to glue it too. I was thinking about a piece of plastic or the back of a piece of laminex with contact glue
Last edited by Adam Barnes; 12-07-2017 at 10:26 AM.
Hi Barnsey, love the quilt, they look like matched book ends. As to you question on the veneer on the truss rod cover, i did the same on my SG-1, used the original plastic cover and used titebond to glue a matching veneer to it.
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
Thanks nitro i actually found some 2mm packing masonite at work today so ive glued it onto that tonight and clamped it
Awesome, glad you worked it out
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
some ebony timbermate on the back and sides this arvo
Last edited by Adam Barnes; 13-07-2017 at 02:49 PM.
good coverage Barnsey. First time you do this it looks messy but well worth it when it's sanded off
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
No kidding the stuff goes ends up every where lucky i covered the face with paper and tape first would have got it all over the quilt
Last edited by Adam Barnes; 13-07-2017 at 03:08 PM.
Posting Permissions
Reply With Quote