Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
what sort of timber is it Frankie ? has some nice grain figure. Is this a new Franky scratchy ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
African Mahogany Wokka. It was an itchy moment at my local Hardware and Building supplies place. It will become a couple of body blanks for now until I decide what to do with it actually finish one or two other builds.
Edit, some of it may need to become parts of a shoe rack. Don't ask. Long story.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha nice one Franky looks like nice timber, presume its at least 40mm thick ? yeah the slabs looked long enough for 2 body blanks.'
Only if there was more spare time in the man cave sigh !
you can build a shoe rack out of pine and stain it !
Last edited by wokkaboy; 30-06-2017 at 04:45 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
They started out 55mm Wokka, but they'll also need some levelling out. They are at about 52 after clean up through the thicknesser.
I ended up with 3M lineal, so thats at least 3 decent blanks....and a shoe rack fascia.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Ikea has shoe racks. Frankie has African Mahogany
Builds to date
#1, 3 string box guitar
#2, GR-1SF, November guitar of the month 2016
#3, Charvel Surfcaster tribute scratch build. ( Completed )
#4, Pawn shop Strat ( Completed )
#5, Current build MM-1Q
A couple of very nice lumps of firewood there
I've got a small pile of spotted gum waiting a burst of enthusiasm somewhere down track, it will almost certainly be a chambered Tele with a 22 fret "rosewood" neck but no idea what to do for pickups maybe Fidelitrons done in Cabronita style
I'm not sure what sort of pressure is required for glueing body blanks, but I figure a wound tight clamp every 10 cm should do.
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looks good Franky. Remember not too much clamp pressure or the glue will squeeze out
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah, I have it about as much as the neck blanks I've made, they seem okay. We shall see, and if it all fails then I'll just have to start again.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.