or two....... looking real nice Darryl
or two....... looking real nice Darryl
Build #1 Completed LP1S
Build #2 Completed STA-1M
Build #3 LP1F http://www.buildyourownguitar.com.au...ead.php?t=7767[url]
Build #4 PRS-1 http://www.buildyourownguitar.com.au...ead.php?t=7881[url]
Build #5 ST-1M http://www.buildyourownguitar.com.au...ead.php?t=7961[url]
Build #6 SGM-1 http://www.buildyourownguitar.com.au...ead.php?t=7857[url]
Next one with the more ornate markings on the top like you were considering for this one?
I may still do it on this one. I have to finalise the finish properly so could still be on the cards
Ahh the G.A.S. (Guitar Acquisition Syndrome) be strong with this one. Welcome aboard the ship of many axes matey. 😎
That has come up really nice Darryl.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Wow darryl
You've hit a six with that build.
Sent from outta space using MartianTalk
Tele Deluxe: http://www.buildyourownguitar.com.au...ht=tele+deluxe
Johnny Ramone:https://www.buildyourownguitar.com.a...=johnny+ramone
ES2V:https://www.buildyourownguitar.com.a...?t=7455&page=9
DMS-1 Mustang: https://www.buildyourownguitar.com.a...=10548&page=12
AG-1 Perhaps i am Tony Iommi: https://www.buildyourownguitar.com.a...t=11537&page=7
Very nice! Lean, mean modern looking LP machine!
Current Projects
#Planning 5 String Bass
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
Mate, after having done this a few times here's my advice for your first attempt:
- get a set of StewMac or equivalent fret pulling pliers. They look like the old school end nip pliers, but the front face is ground flush when they close.
- get or make a set of fret board protectors/ chip stoppers, to shield your fretboard
Link here:http://www.stewmac.com/Luthier_Tools...et_Puller.html
-put a little back bow on the neck before you attempt to pull the frets, it may help you free up the tangs and prevent chipping.
- get some small needle files or specialised fret end files to dress the ends. With your bound fretboard you will need to notch the tang at each end of the fret once you get it cut to size to allow for the body of the fret to overhang the binding. If you don't want to outlay for the special tool to do this (it runs at about 60 odd bucks link here: http://www.stewmac.com/Luthier_Tools...ng_Nipper.html) you'll need to use a small square or flat file to do this.
But I realise that you've probably already done this research...
Last edited by FrankenWashie; 29-07-2017 at 01:13 PM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.