Nice one! You'll have plenty of things to do with four builds going on
Nice one! You'll have plenty of things to do with four builds going on
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Always something to do, mainly honing my 'repair' skills lol!
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
Yep one of the new kits. All mahogany. Next on list is a set of Benson P90 dog ears (I think they are available). Bridge pup for this build, neck pup for my ES 5VOriginally Posted by wokkaboy
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
So it’s been a while between postings......
I thought I’d go against the grain on this one so to speak and install neck before finishing. Reason being I want to make sure it’s a good a fit as possible then remove the step between body and neck heel on the sides. It will be a royal PITA to finish but anyhow....
The kit bridge / drilled posts were about 1/2 cm too long for correct intonation. However with a GFS bridge intonation is spot on.
I’ve used stock tuners and happy to report they feel more stable than same style Klusons I have on my ES5V build.
Frets have been leveled & dressed and for testing purposes the plastic nut has been filed for correct string gauge/string height. The neck straightened with no issues.
And sides of neck joint on body profiled to remove the step. The neck pocket has full contact on all sides and I used a veneer to fill a small gap at the end.
Next job to carve out the SG Jnr curves and contours.
As it is it plays like a dream and acoustically loud which is a good sign.
Sent from my iPhone using Tapatalk Pro
Last edited by andrewdosborne; 14-11-2017 at 04:59 AM.
Current Projects
#Planning 5 String Bass
Yes, that little step between the body rear and the neck heel sh*ts me as well, that’s why I butchered my EXA-1 kit to get rid of it.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Nice 1 Ponch.
Do you reckon the Bridge pup is going to be too close to the bridge for a decent oscillation of the strings?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Cheers guys. The pup position is similar to my LP jnr should be ok but time will tell....!
Sent from my iPhone using Tapatalk Pro
Current Projects
#Planning 5 String Bass
And carving process underway. This axe is starting to feel very lightweight
Sent from my iPhone using Tapatalk Pro
Current Projects
#Planning 5 String Bass
Even with all the hardware attached, mine is crazy light. Looking good!
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Looking good Ponch.
Interested to see what you do with neck heel from underneath?
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Posting Permissions
Reply With Quote
