Page 2 of 11 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 101

Thread: First Build LP1-SP

  1. #11
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    yeah pretty good service really. I can order bike parts from UK and got them in 3 working days. Yet to get Australia post to get something to eastern states is usually at least a week
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #12
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    In the UK you've normally got a wide range of delivery options offered by most suppliers (post and courier) and you can almost always get something delivered the next day (sometimes at a premium) or the day after that (at minimum cost) if you order early enough in the day.

    Normally only issues if you live in the remoter Scottish highlands or islands.

  3. #13
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    all good if you live in the Scottish highlands you would just crack a bottle of single malt and wait haha
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. Liked by: wazkelly

  5. #14

  6. #15
    Member Thijs's Avatar
    Join Date
    May 2017
    Location
    East of the Netherlands
    Posts
    30
    Jup! Very thin veneer!!
    My build suffered the thin-veneer-demon as well... Still recovering, though!

    Looking forward to follow your progress.

  7. #16
    Member
    Join Date
    Jun 2017
    Location
    North East UK
    Posts
    356
    Gutted, it landed here Wed night in Coventry of all places, since then has been in transit.... went to work early this morning for a change, got there looked at the tracking e-mail only to find out there was an attempted deliver at 07:55, Made excuses to get home at lunchtime thinking I could nip to the local sorting office to collect it only to find out there is no note through the door, so i don't even know if it was Royal Mail did the delivery.

  8. #17
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    The tracking goes a bit fuzzy when it hits the UK. 'Attempted delivery' probably means they've processed it and now sent out the 'duty to pay' card in the post, which hopefully you'll get tomorrow. I've had the same thing, and being in at the time, knew it didn't happen.

  9. #18
    Member
    Join Date
    Jun 2017
    Location
    North East UK
    Posts
    356
    Got the letter through this morning about 11:45 am... it's in the local depot about 15 mile away, damn place closed at 12:00, didn't realise that and nearly got a speeding ticket going too... So Monday it is... I'll be there for opening time, bring the little wonder home and drool over it, will only do a quick inspection of everything, travelling up to Aberdeen Tues early hours so will leave it till I get home before anything is done...

  10. #19
    Member
    Join Date
    Jun 2017
    Location
    North East UK
    Posts
    356
    Anyone got any advice on Wudtone? As the body and neck are mahogony I know they have to be sanded and filled... Wudtone can supply a colourless filler with the kit which apparently goes on with the 2nd base coat... anyone used it?

  11. #20
    Member
    Join Date
    Jun 2017
    Location
    North East UK
    Posts
    356
    Well, I picked it up then panicked...
    Click image for larger version. 

Name:	IMAG1055 [Guitar].jpg 
Views:	249 
Size:	72.8 KB 
ID:	20017

    Luckily enough no damage whatsoever, the we discovered something else, inadvertantly Pitbull had sent me 2 guitars..

    One with the Spalted Maple, the other Flame Maple...

    I contacted Adam and he offered me a great deal.... so 2 kits to go at now....
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMAG1056 [Guitar].jpg 
Views:	107 
Size:	42.7 KB 
ID:	20018   Click image for larger version. 

Name:	IMAG1058 [Guitar].jpg 
Views:	96 
Size:	23.0 KB 
ID:	20019  

Page 2 of 11 FirstFirst 1 2 3 4 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •