cool thanks Matt I had a quick look at the build parts for the basic Theremin pedal. To build one is way above my electronics ability so might look at building a more simple pedal from a kit.
cool thanks Matt I had a quick look at the build parts for the basic Theremin pedal. To build one is way above my electronics ability so might look at building a more simple pedal from a kit.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'd recommend one of the fuzz pedals or basic distortion pedals to start with, they have minimal parts and are pretty easy to build.
There are some good beginner ones at diyguitarpedals.com.au, but unfortunately he has had to close his shop at the moment due to family commitments. So one of the overseas suppliers will have to do for now.
Hey wokkaboy, Paul has reopened his shop at diyguitarpedals.com.au, so might be a good time to get a beginner kit? This one would be a good place to start: http://www.diyguitarpedals.com.au/sh...products_id=31
You can get it with all the parts included, and there's a video on the page showing how to build it.
ok cheers for the heads up Matt
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in